Scope RFI (Request for Information)




Scope RFI is a fast and convenient online form to help determine the right scope solution
(hardware, options, software, probes, and accessories) for your current or future applications.

Your selected Scope RFI preferences generate:

 Your scope specification summary page

 An email quotation of the LeCroy scope and options that best match your Scope RFI
	
Your Contact Information 

First and Last Name                   Company or University 
             

City and State                        Email Address 
             


     Technology Area
     
     Electronics - Product Development and Debug
Analog
Automotive
Backplane
Blue Tooth
Cable Modems
Communications
Computer
DSP
Disk Drive
Edge
Electrical
Ethernet 1 Gb
Ethernet 10 Gb
Ethernet 10/100 Mb
FB DIMM
FPGA Embedded
Fibre Channel 8.5
Field Service
HDMI
LASER
LIDAR
Medical
Memory
Motor Control
PCI-E Gen 2
PCI-E Gen 1
RADAR
SAS 3 Gb Gen 2
SAS 6 Gb Gen 3
SATA 3 Gb Gen 2
SATA 6 Gb Gen 3
SERDES
Semiconductor
Sensor
Time of Flight
USB 2.x
UWB
Ultrasonics
Wireless 
XAUI
XAUI X2


     Applications Requiring a Scope 
     (check each that apply)
     Analog Signal Debugging
     Digital Signal Debugging 
     Signal Data Acquisition 
     Signal Integrity (Rise, Fall, Amplitude, Shape, Mask, Eye)
     TDR S-Parameters
     Automated Measurements  
     Partial/Full Automated Testing (Compliance, Device Qualification, Verification, Limit, Worst Case)  
     Jitter Measurements (Clock, Data, Skew, Time Interval Error, Stress)
     Serial Data Analysis - (PCI-E, SAS/SATA, UWB, Ethernet, USB, HDMI, etc.)
     Remote Control and Viewing 

     Preferred Scope Form Factor 
     
Portable
Portable with Case
Lab Bench
Lab Cart
Rack Mount
Hard Shell Case (Air Transit)


     Real Analog Bandwidth (No DSP Boost)
     (RT = Real Time Single Shot   SS = Sampling Scope ~ Repetitive Waveforms Required)
     
100 MHz RT
200 MHz RT
400 MHz RT
600 MHz RT
1 GHz RT
2 GHz RT
3 GHz RT
4 GHz RT
6 GHz RT
9 GHz RT
11 GHz RT
18 GHz RT
20 GHz RT
> 20 MHz RT
> Optical RT
20 GHz SS
30 GHz SS
50 GHz SS
70 GHz SS
100 GHz SS
Optical SS
                      

     Number of Analog Scope Channel Inputs    
     
     4
     3
     2
     1


     Number of Digital Scope Channel Inputs
     Note:
     Digital lines can be used for scope triggering or viewed with a time correlated analog trigger input
     
0
1
2
3
4
8
18
36


     Maximum Sample Rate on 1 Channel 
     
1 GS
2 GS
5 GS
10 GS
20 GS
40 GS
60 GS


     Maximum Sample Rate on 2 Channels 
     
1 GS
2 GS
5 GS
10 GS
20 GS
40 GS
     

     Maximum Sample Rate on 4 Channels 
     
1 GS
2 GS
5 GS
10 GS
20 GS
 

     Maximum Memory Depth @ Maximum Sample Rate 
     
500 K
1 M
2.5 M
10 M
12.5 M
25 M
50 M
100 M
 
                     
     Longest Single Recording Time @ Maximum Sample Rate
     Note:
     Sample Rate * Memory Depth = Recording Time
     1/recording time = lowest frequency detected for jitter and FFTs
     
50 ps
100 ps
500 ps
10 ns
100 ns
500 ns
1 us
5 us
10 us
100 us
1 ms
5 ms
10 ms
100 ms
500 ms
1 second
                      

     Highest Pk-Pk Voltage Expected to Measure 
     
20,000 V
10,000 V
2,500 V
1,000 V
500 V
300 V
150 V
100 V
50 V
10 V
5 V
1 V
.5 V
.1 V
                      

     Lowest Pk-Pk Voltage Expected to Measure
     
1 mv
5 mv
10 mv
50 mv
100 mv
.5 V
1 V
5 V
10 V
50 V
100 V
150 V
300 V
500 V
1,000 V
2,500 V
10,000 V
20,000 V


     Probes and Number Required
     (check all that apply and number required)
     Passive Voltage Probes 
0
1
2
4
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
       

     High Voltage Probes 
0
1
2
4
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

  
     Current Probe 
0
1
2
4
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
    

     Active FET Voltage Single Ended 
0
1
2
4
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
 
   
     Active Differential (lvds) 
0
1
2
4
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

   
     Active High Voltage Differential 
0
1
2
4
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20


     O to E Converter 
0
1
2
4
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20


     Serial Decode/Triggering
     (check all that apply)
     I2C
     SPI
     RS-232
     Canbus 
     Customized Decoding

     Measurements Required
     (check all that apply)
     Standard Horizontal (Frequency, Period, Width, Rise, Fall)
     Standard Vertical (Amplitude, RMS, Maximum, Minimum)
     Set Up and Hold
     Power 
     Jitter
     Skew 
     Jitter Components (Tj, Rj, Dj)
     Statistics - Worst Case, Best Case, Mean, Standard Dev.
     Response Times (PLLs, Settling, etc.)
     Custom (Unique or proprietary algorithm)
     Parameter Math (e.g. RMS of Channel 1 / RMS of Channel 2)
     Automated Measure/Feature Find in Waveform (WaveScan)

     Waveform Math/DSP Functions
     (check all that apply) 
     Averaging
     Standard Math (+, -, *, /)
     FFT
     Trending (Plotting Measurements over Time)
     Tracks (Plotting Measurements as an amplitude over region taken
     Histograms (Statistical Distributions)
     Chained Math - (Sequential math functions before next trigger)
     Response Times (PLLs, settling, etc.)
     Eye/Mask

     Number of Scopes Required
     
1
2
3
4
5
> 5


     Model Currently in Use or in Consideration
      

     Purchase Plan
     
     New Capital Purchase - New Requirement
New Capital Purchase - Replacing Old or Broken
Need demo evaluation prior to purchase decision
New Lease to Own
Rental 1 month
Rental 3 month
Rental 6 month
Rental 6 month w/equity build - may purchase
Demo - fully refurbished with warranty
Used 
Want Upgrade - May Trade 


     Comments - Important Issues
          enter here... 



     Month Required
     
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec


     Thank you. 

     A quotation will be prepared and sent to your email address.

     The next page you see will be your summary of specifications and preferences.
     (Use your browser to page back to here from the summary page for edits.)

     

     Please contact me if you have any questions or suggestions. 

     Best regards, 

     John Seney (wd1v/fn42)
     Northeast Region LeCroy Sales Engineer
     Cell 617 686-9882
     John.Seney@lecroy.com